Siemens 2614 - Manual (Page 19)

3-8
address for you to use, select Yes and enter the designated IP address and subnet mask.
Advanced Setup Procedures
After completing the Simple Setup menu options, you will next move to the Advanced Setup options.
You may also go directly to any of these screens by clicking that option on the main menu.
The SpeedStream 2614 DSL/Cable Router supports advanced functions including hacker attack protection,
virtual servers, special applications configuration, virtual server, client filtering, and remote management.
We highly recommend you keep the default settings.
Configure LAN Gateway and DHCP Settings
From this screen, you can dynamically assign the IP addresses for client computers, enable the DHCP
server, set the lease time, and specify the address range.
Note:
Remember to configure all of your client computers for dynamic address allocation.
Valid IP addresses consist of four numbers separated by periods. The first three fields are the network
portion, and can be from 0–255, while the last field is the host portion and can be from 1 to 254. Remember
not to include the gateway address of the SpeedStream 2614 in the client address pool.
Figure 3-4. Advanced Setup | LAN