2ohp slip sheet—copying or inserting slip sheets – Savin 9922DP User Manual
Page 81
Copying
70
2
OHP Slip Sheet—Copying or Inserting Slip
Sheets
For each original page, a slip sheet
will be placed after each copy, or a
slip sheet will be fed and the same
original image copied onto this slip
sheet.
❖
Copy
❖
Blank
Preparation
Before you can use this function,
you need to select the “Tray 2” or
the “Bypass” as Cover Only Tray
with the “12. Cover/OHP Tray”.
⇒
P.118 “1. General Features 3/4”
Note
❒ Set slip sheets of the same size and
in the same orientation as OHP
transparencies.
❒ You can specify whether to make
copies onto the inserted slip sheets.
❒ If you do not copy onto a slip sheet,
the sheet is excluded from the
number of copies counted.
A
Press the {
Cover/OHP Slip Sheet
}
key.
B
Press the
[OHP Slip]
key.
C
Specify whether to copy on the
slip sheet with the 01 keys.
Then press the
[OK]
key.
D
Set OHP transparencies in the by-
pass tray or tray 2.
E
Press the
[Exit]
key.
F
Set the slip sheets in the paper
tray, then select this tray by press-
ing the 01 keys.
G
Set your originals, then press the
{
Start
} key.
2
2
2
1
2
1
1
1
2
2
2
1
1
1