SMSC USB2513 - Manual

SMSC USB251x Hub Family DATASHEET Revision 1.0 (3-11-09)
Datasheet PRODUCT FEATURES
USB2512/12A/12B
USB2513/13B
USB2514/14B
USB2517
USB 2.0 Hi-Speed
Hub Controller
General Description
The SMSC USB251x hub is a family of low-power, OEM
configurable, MTT (multi transaction translator) 1 hub
controller IC products for embedded USB solutions. The
“x” in the part number indicates the number of
downstream ports available. The SMSC hub supports
low-speed, full-speed, and hi-speed (if operating as a hi-
speed hub) downstream devices on all of the enabled
downstream ports.
For a summary of the products documented in this
datasheet, please refer to the Chapter 1, "USB251x Hub
Family Differences Overview," on page 7 .
Highlights
„
High performance, low-power, small footprint hub
controller IC with 2, 3, 4, or 7 downstream ports
(indicated by the “x” in the part number)
„
Fully compliant with the USB 2.0 specification
„
Enhanced OEM configuration options available
through either a single serial I 2 C
®
EEPROM, or
SMBus slave port
„
MultiTRAK TM
— High-performance multiple transaction translator which
provides one transaction translator per port
„
PortMap
— Flexible port mapping and disable sequencing
„
PortSwap
— Programmable USB differential-pair pin locations ease
PCB design by aligning USB signal lines directly to
connectors
„
PHYBoost
— Programmable USB signal drive strength for recovering
signal integrity using 4-level driving strength resolution
Features
„
Full power management with individual or ganged
power control of each downstream port
„
Fully integrated USB termination and pull-up/pull-
down resistors
„
Supports a single external 3.3 V supply source;
internal regulators provide 1.2 V or 1.8 V internal
core voltage
„
On-chip driver for 24 MHz crystal resonator or
external 24/48 MHz clock input
„
Customizable vendor ID, product ID, and device ID
„
ESD protection up to 4 kilovolts on all USB pins
„
Supports self- or bus-powered operation
„
USB251xB 2 and USB251xBi products support the
USB Battery Charging specification
„
Lead-free RoHS compliant packages:
— 36-pin QFN (6x6 mm)
— 48-pin QFN (7x7 mm)
— 64-pin QFN (9x9 mm)
„
USB251xi, USB2512Ai, and USB251xBi products
support the industrial temperature range of -40ºC
to +85ºC
Applications
„
LCD monitors and TVs
„
Multi-function USB peripherals
„
PC motherboards
„
Set-top boxes, DVD players, DVR/PVR
„
Printers and scanners
„
PC media drive bay
„
Portable hub boxes
„
Mobile PC docking
„
Embedded systems
1.USB2512A/Ai only uses a single transaction translator.
2.USB251xB and USB251xBi products are not yet available.
The information in this datasheet regarding USB251xB/Bi
serves as a preliminary product preview.