Sony RM-LP211 - Manual (Page 22)

22 GB
Other operations (continued)
1
Press RM SET UP.
The set up list appears.
AUTO POWER
BACK LIGHT
CONTRAST
p COMMAND MODE
2
Move the easy scroll key to select
“COMMAND MODE”, then press the key
to enter the selection.
The COMMAND MODE list appears.
<COMMAND MODE>
p
MAIN ROOM
2ND ROOM
3RD ROOM
3
To select the command mode for the
main room
Move the easy scroll key to select “MAIN
ROOM”, then press the key to enter the
selection. Move the easy scroll key again to
select “AV SYSTEM1” or “AV
SYSTEM2”, then press the key to enter the
selection.
To select the 2nd room mode
Using an optional IR repeater as shown
below, the following operations are possible
with the remote:
• Switching sources.
• Adjusting the volume.
• Switching the power to on or off.
Set the command mode of the remote to the
2nd room mode.
Move the easy scroll key to select “2ND
ROOM”, then press the key to enter the
selection.
To select the 3rd room mode
Move the easy scroll key to select “3RD
ROOM”, then press the key to enter the
selection.
Tips
• Only when the remote is turned on by pressing
SOUND FIELD or FUNCTION, the COMMAND
MODE appears in the first line of the display.
• Make sure that the command mode of the remote
and the receiver in the main room is the same.
Notes
• The 3rd room mode is not available with
STR-DA4ES.
• The 2nd (or 3rd) room mode is available for North
American model only.
x 2nd room operation
Amplifier
Monitor
Speaker Speaker
IR repeater
(not supplied)
IR repeater
(not supplied)
Audio/Video components
2nd room Main room
2ND
ROOM
OUT
STR-DA7ES/DA4ES
RM-LP211
+
–
+ –
+
–
+
–
+
–
O
AV ?/1 TV ?/1
SOUND FIRLD
TOP MENU/GUIDE AV MENU
DISPLAY
TV VOL TV CH TV/VIDEO
WIDE
MAIN
MENU
ON SCREEN
RETURN/EXIT
MASTER VOL
MUTING
FUNCTION
SYSTEM STANDBY
RM SET UP
?/1
H X x
. > m M