SMC Networks EZ Card 10 - Manual (Page 12)

Specifications
Network Interface
10BASE-T
RJ-45 (UTP Cable: EIA/TIA Categories 3, 4, 5)
100BASE-TX
RJ-45 (UTP Cable: EIA/TIA Category 5)
Standards Supported
ANSI/IEEE 802.3, 802.3u and ISO/IEC 8802-3
PCI Local Bus Specification
Rev. 2.0 or later
Hardware Compatibility
PCI local bus-compliant PCs
Data Interface
32-bit bus-mastering PCI
I/O Address
Automatically determined by configuration space
Interrupt
INT A, mapping to BIOS IRQ setup
Temperature
0° to 55° C (32° to 131° F)
Humidity
10% to 90% (non-condensing)
Typical Maximum Operating Voltage
On-board twisted-pair transceiver
+5 VDC@145 mA (Standby); @200 mA (Transmit)
+12 VDC@105 mA (Standby); @105 mA (Transmit)
Size (without bracket)
4.72 in. x 2.56 in. (12 cm x 6.5 cm)
EMC/Safety Compliances
CE marking
FCC Class B
Industry Canada Class B
EN55022 (CISPR 22) Class B
AS/NZS 3548 (1995) - Class B
VCCI Class B
IEC 1000-4-2/3/4
EN60950 (TÜV Bauart)
UL 1950
CSA 22.2 No. 950
Warranty
Limited Lifetime
Network Drivers
Microsoft drivers
Windows 95
Windows NT 4.0
Windows for Workgroups 3.11
LAN Manager v2.0
Novell NetWare
32-bit ODI Driver
16-bit DOS ODI Driver
Client32 for Windows 95
SCO
Unix 3.2.4
ODT 5.0
Other
NDIS2 DOS Mode Driver
IBM
Banyan Vines Client
Packet Driver
RJ-45 Connector Pin Assignments
1 Output Transmit Data +
2 Output Transmit Data -
3 Input Receive Data +
6 Input Receive Data -
4,5,7,8 Reserved for other use
Pin Number Assignment