SMC Networks EZ Card 10 - Manual (Page 11)

Hardware Description
The EZ Card 10/100 is equipped with :
•
1 10BASE-T/100BASE-TX RJ-45 port
•
1 Socket for optional boot ROM
•
3 LED indicators
The following table describes the operation of the
EZ Card 10/100 status LEDs:
LNK
10 Mbps Green Valid 10BASE-T link
Off Power is off; 10BASE-T
connection is invalid
100 Mbps Green Valid 100BASE-TX link
Off Power is off; 100BASE-TX
connection is invalid
ACT Green Heavy network activity
Blinking Intermittent or light network
activity (The blinking rate is
proportional to the amount
of network traffic)
LED Condition Status