Sony 3-295-946-12(1) - Manual (Page 32)

32 GB
Watching a DVD/Blu-ray disc
1 2 3
4 6
7 8
0/10 ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP DMPORT
VIDEO1 VIDEO2 BD DVD
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
TUNING –
TV
TUNING +
FM MODE
REPLAY ADVANCE
MOVIE MUSIC
AMP MENU
CLEAR
DISPLAY MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATRE
SAT TV SA-CD/CD TUNER
?/1
-
.
H m M
X x
< < >
O
5
>10
MENU/HOME
TOOLS/
OPTIONS
MEMORY
TV ?/1
AV ?/1
DMPORT VIDEO 1 ACTIVE
STANDBY VIDEO 2 DVD SAT TV SA-CD/CD TUNER
MASTER VOLUME
AUTO CAL MIC
INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING
BD
?/1
2
3
6
6
3
Notes
• Refer to the operating
instructions supplied with the
TV and DVD player or Blu-ray
disc player.
• Check the following if you
cannot listen to multi channel
sound.
– Be sure this receiver is
connected to the DVD player
or Blu-ray disc player via a
digital connection.
– Be sure the digital audio
output of the DVD player or
Blu-ray disc player is set up
properly.
Tips
• Select the audio format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Refer to
page 44 for details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
1
Turn on the TV and DVD player or Blu-ray
disc player.
2
Turn on the receiver.
3
Press DVD or BD.
You can also use INPUT SELECTOR on this receiver to
select “DVD” or “BD”.
Be sure to change the factory setting of the DVD input
button on the remote so that you can use the button to
control your DVD player. For details, see “Changing
button assignments” (page 61).
4
Switch the input of the TV so that an image
of the DVD/Blu-ray disc is displayed.
If no image is displayed on the TV screen, make sure that
the video output of the DVD player or Blu-ray disc player
is connected to the TV.
5
Playback the disc.
6
Adjust to a suitable volume.
7
After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player or Blu-ray disc player.