Sunbeam Food Slicer - Manual (Page 7)

3. Set the function control switch, located at
the rear of the handle to the ‘Spin-Dry’
setting. See figure 7.
4. Press the power trigger switch located
underneath the front of the handle to start
the spinning motion. Five to twenty seconds
of spinning is usually sufficient to dry salad
greens (see figure 5).
5. To retrieve salad greens, turn the function
control switch to the ‘Off’ position, release
the safety latches and lift the cover of the
SaladExpress away from the processing bowl.
Important: Never use the ‘Slice/Grate’ function to
spin salad greens.
Things to remember when using the
Sunbeam SaladExpress
• The motor on the SaladExpress will not
activate if the safety latches are not correctly
fastened around the edge of the processing
bowl. If the motor does not respond when
you press the power trigger switch, make
sure that the latches are fastened, the
function control switch is not set to the ‘Off’
position and the unit is plugged in and
turned on.
• The spin dry function will not work unless a
cutting disc is attached to the cover of the
SaladExpress.
7
Using your Sunbeam SaladExpress (cont).
(Figure 7)
Spin Dry
setting