Scag Power Equipment FREEDOM Z SFZ - Manual (Page 15)

11
Section 3
3.3 TRACTOR (CONT'D)
Travel Speed:
Forward ................................................................................. 0-8 MPH
Reverse ................................................................................. 0-5 MPH
3.4 CUTTER DECK
Type: .......................................................................................... Floating, Adjustable, Anti-scalping, Hybrid Design Combines
Out-front and Belly-mount Designs
Construction: ............................................................................. 10-Gauge top with 11-Gauge reinforcement throughout the
spindle area, 7-Gauge skirt for strength and longevity.
True Cutting Width: ................................................................... 36" (91.44 cm), 48" (122.0 cm), 52" (132.0 cm)
Cutting Height Adjustment: ....................................................... Foot Operated Lever Adjustment from Operator's Seat, 1" to
4.5" in 1/4"increments
Cutter Blades: ............................................................................ .197 Thick, Milled Edge, Wear Resistant Marbain™
Blade Engagement: ................................................................... Electric Blade Engagement Clutch with Control Panel Switch
Connected to the Cutter Deck via Belt.
Discharge Opening: ................................................................... Extra Wide Discharge Opening with Spring-Loaded Discharge Chute
Spindles: .................................................................................... Heavy-duty Spindle Shaft, Cast Aluminum Housing, Sealed Ball
Bearing, Maintenance-Free
Spindle Pulleys: .......................................................................... Split Steel
Cutter Deck Belts: ...................................................................... B-section with Kevlar Cord. Self-adjusting, Self-tightening
Electric Clutch Type ................................................................. Ogura Heavy Duty PTO Clutch Brake
3.6 HYDRAULIC SYSTEM
Hydraulic Oil Filter ................................................................... 40 Micron Spin-on Element Type
Hydraulic Reservoir .................................................................. Nylon
3.7 PRODUCTIVITY
The following chart will aid you in determining how many acres your Scag mower will cut per day.
The chart is an estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.
Cutting Width: 36" 48" 52"
Acres Per Day: 14.0 18.6 20.2
-NOTE-
The machine will travel at 8 mph for
transport purposes. For best cutting
performance the forward travel speed
should be adjusted depending upon the
cutting conditions.