Siemens Sinumerik 810T - Manual (Page 220)

11.90 3 Operating Sequences
3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode
Operate the ”Program start” key.
Important:
”Feed hold” display must not be present.
The entered block is now processed by the control, and subsequently deleted.
Note:
Before ”Program start” is operated, you can enter several blocks (max. 256 characters).
The ”retentive (modal) input data” (feedrate) remain.
They are deleted or reset
• by changing the operating mode
• by ”RESET”
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-115
SINUMERIK 810T, GA3 (BN)