Samsung SPD-3700T - Manual (Page 9)

16 SPEED DOME CAMERA ACCESSORIES 17 SPEED DOME CAMERA ACCESSORIES
Sealing Tape
SPSS32A/SCH40 Size Pipe
PF 1 1/4"
STB-30PF
Camera Adaptor
Fan Heater Adaptor
(STH-380PO Only)
■ 3.3 Indoor Flange Mount Type Installation
This guideline is based on the installation of the indoor flange STB-25PF and the
ceiling exposed mount STB-370PC.
STB-370PC
STB-30PF
STB-25PF
STB-496PPV
STB-30PF
STH-380PO/370PO/370PI/360PO STH-380PO/370PO/370PI/360PO
1. Preparing Pipe and Ceiling Bracket
STB-30PF requires a SPSS32A/SCH40-sized pipe as shown in the picture. Assemble the
screw taps, and then wind a sealing tape around the screw barrel to prevent water leakage.
Please note that the STH-380PO housing requires an additional installation of the fan
heater adapter enclosed with the product.
2. Assembling STB-30PF and Pipe
After sealing the screw taps, assemble the STP-30PF flange securely to the pipe.
•Usingunsealedscrewtapscancausetheproducttofalldownorallowwaterleakagethat
may lead to fire or damage the product. Sealing tape is not enclosed with the product, and
needstobepurchasedatyourexpense.
Notes
•Donotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
Notes
✽ For the next installation procedures, refer to the “Wall Type Housing” installation from step 2.
Pendant Type Installation Pendant Type Installation