Sportline DUO 1025 User Manual
Page 17
14
DUO 1025 Dual-Use Heart Rate Monitor
SETTING THE WATCH FUNCTIONS
SETTING HEART RATE TARGET ZONES (continued)
The Sportline Duo 1025 automatically calculates your Maximum Heart Rate from
your User Profile and uses this information to display Heart Rate Zones.
NOTE: This information must be programmed prior to selecting Target Zone. See page 12.
1.
In Heart Rate/Exercise Timer mode,
PRESS & HOLD
the
MODE/SET (MODE)
key
until SETTING appears in the upper line of the display to enter the Programming
Sequence.
2.
Select Target Zone (Active, FatBurn, Enduranc or MyZone=User Defined) by
PRESSING
the
START/STOP (S/S)
or
LAP/VIEW (L/V)
. Set Target Zone by
PRESSING
MODE
.
3.
Select Zone Alarms (Above Zone and Below Zone) ON or OFF by
PRESSING
S/S
L/V
. Set Zone Alarms by
PRESSING
MODE
.
NOTE: Zone Alarm is an audible signal that sounds when you are above or below your selected
Target heart Rate Zone.
4.
Adjust MyZone Lower Limit by
PRESSING S/S
or
L/V
. Set by
PRESSING
MODE
.
5.
Adjust MyZone Upper Limit by
PRESSING
S/S
or
L/V
. Set by
PRESSING
MODE
.
6.
PRESS & HOLD
MODE
to exit the Programming Sequence and return to HR/
Exercise mode.
ADJUST: S/S or L/V
SET: MODE