Sony FD Trinitron KV-21LT1E - Manual (Page 8)

8
9
GB
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
1
Press the
MENU
button to switch the first level menu on.
MENU
Menu System
2
• To highlight the desired menu or option, press
or
.
• To enter to the selected menu or option, press
.
• To return to the last menu or option, press
.
• To alter settings of your selected option, press
//o
r
.
• To confirm and store your selection, press
OK
.
3
Press the
MENU
button to remove the menu from the screen.
continued...
MENU
K
Menu Guide
PICTURE ADJUSTMENT The “Picture Adjustment” menu allows you to alter the picture adjustments. To do that: after selecting the item you want to alter press
, then press repeatedly
/
/
or
to adjust it and finally press
OK
to
store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching:
Personal
(for individual settings).
Live
(for live broadcast programmes).
Movie
(for films).
Level 1
Level 2
Level 3 / Function
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
•
Brightness, Colour
and
Sharpness
can only be alterated if “Personal” mode is selected.
•
Hue
is only available for NTSC colour signal (e.g: USA video tapes).
•
Select
Reset
and press
OK
to reset the picture to the factory preset levels.
10
Menu System
SLEEP TIMER The “Sleep Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do that: after selecting the option press
,
then press
or
to set the time period delay
(max. of 4 hours) and finally press
OK
to store.
•
While watching the TV, you can press the
button on the remote control to display the
time
remaining.
•
One minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
ON TIMER The “On Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do that: after selecting the option press
,
then press
or
to set the time period delay
(max. 12 hours) and press
OK
to store. Finally
press the standby button
on the remote
control. After the selected length of time the TV switches on automatically. •
The standby indicator
on the TV set flashes
regularly to indicate that “On Timer” is active.
•
Any loss of power will cause these settings to be
cleared. LANGUAGE / COUNTRY The “Language/Country” option in the “Set Up” menu allows you to select the language that the menus are displayed in. It also allows you to select the country in which you wish to operate the TV set. To do that: after selecting the option, press and then proceed in the same way as in the steps 2 and 3 of the section “Switching On the TV and Automatically Tuning”.
Level 1
Level 2
Level 3 / Function
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
T imer
Sleep
T imer: Of
f
On
T imer: Of
f
OK
T imer
Sleep
T imer: Of
f
On
T imer: Of
f
OK
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
T imer Sleep
T imer: Of
f
On
T imer:
i Of
f
OK
T imer
Sleep
T imer: Of
f
On
T imer: Of
f OK
continued...
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
OK
Set Up
Language/Country Auto
T uning
Programme Sorting Manual Programme Preset Advanced Features
OK
Set Up
Language/Country Auto
T uning
Programme Sorting Manual Programme Preset Advanced Features
OK