Sharp AHT-E300 - Manual (Page 14)

10
AHT-E300 ADSL ROUTER
Open your Web Browser on your PC that is connected to AHT-E300 ADSL
Router..
Type “http://10.0.0.2” in the browser’s Address box and Press Enter. This
address is the default LAN IP address of AHT-E300 ADSL Router.
1.
A user name and password prompt will appear. Type User Name as admin
and password as conexant.
Notice: You must set up AHT-E300 ADSL Router via LAN. Make sure that the PC is
connected to AHT-E300 ADSL Router.
Start-up with Web-based Management
Notice: If the user name and password prompt appears again, it
means unauthorized user. Please check Caps Lock key. AHT-E300
ADSL Router distinguishes the uppercase and lowercase letters (in
the password).
Notice: You can change the password later.
Notice: Internet Explorer 4.0 or higher version is recommended