Sharp AHT-E300 - Manual (Page 7)

AHT-E300 ADSL ROUTER
3
LED Status Description
On Power on
Power
Off No power
On LAN connection is active.
LAN
Off
LAN connection is not
active.
Blinking Data is being transferred.
RXD
Off Data is not transferred.
Blinking
Modem is trying to sync
with DSLAM.
LNK
(ADSL)
On ADSL sync is finished.
Port Description
Line
Connect RJ-11 cable to ASDL
port of micro-filter
LAN
Connection to PC.
Use the supplied RJ-45 Straight
Through Cable.
Reset
Pressing the Reset Switch and
holding it for 5-seconds will
restore the factory default
settings.
Power Turn on or off the power.
DC in
Connect the supplied Power
Adapter.
The Front Panel LEDs
LNK RXD LAN Power
The Rear Panel
Phone
(Optional)
Line
LAN
DC in
Power
Reset