SPX Cooling Technologies Marley QuadraFlow - Manual (Page 6)

The QuadraFlow is factory-fabricated, and is designed to
be assembled at the jobsite. This allows the design flexibility
that results from the unique QuadraFlow configuration and
permits a wide variety of orientations.
Normally this assembly is included as part of the cooling
tower contract, and is performed by erection subcontractors
recognized and sanctioned by SPX. Their knowledge and
expertise assures proper fit-up, alignment, and sealing of
the various tower components—and contributes significantly
to the trouble-free long-term operation of the tower. It also
enables SPX to guarantee the thermal performance of the
assembled tower. Therefore, it is strongly recommended
that either SPX supervision or complete tower erection be
included as part of your order.
Nevertheless, we recognize that circumstances may
produce situations that require the tower to be assembled
by inexperienced personnel without benefit of SPX erection
labor or supervision. In support of that, a comprehensive,
illustrated, assembly instruction manual is included with every
shipment. This manual pictorially identifies the various tower
components and provides step-by-step instructions designed
to result in a properly assembled installation. Copies of this
manual are also available to customers, on request, prior to
the shipment of the tower to permit planning of the assembly
process. However, we regret that thermal performance of
a QuadraFlow cannot be certified or guaranteed without
qualified SPX supervision during the assembly process.
/ On-Site Assembly /