Setting the clock – Sharp XL-MP60 User Manual

Page 15

Advertising
background image

15

8

7

6

5

4

3

2

1

9

10

05/1/28

XL-MP60(U).fm

TINSEA043SJZZ

XL-MP60

Ba

sic Ope

ration

Setting the clock



In this example, the clock is set for the 12-hour (AM 12:00) display.

To confirm the time display:

Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.

To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 1, step 2 (for selecting the 12-hour or 24-hour display) will
be skipped.

To change the 12-hour or 24-hour display:

1

Press the CLOCK button and within 8 seconds, press the
MEMORY/SET button.

2

Within 30 seconds, press the PRESET ( or ) button to
select 12-hour or 24-hour display and then press the MEM-
ORY/SET button.

"AM 12:00"

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

"0:00"

The 24-hour display will appear.

(0:00 - 23:59)

3

Within 30 seconds, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY/SET button.

Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.

4

Within 30 seconds, press the PRESET ( or ) button to
adjust the minutes and then press the MEMORY/SET but-
ton.

Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.

Press the CLOCK button.
The time display will appear for
about 8 seconds.

1

Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 30 for details.]

2

Perform "Setting the clock" from step 1.

Advertising