Sharp XL-MP60 - Manual (Page 17)

17
8
7
6
5
4
3
2
1
9
10
05/1/28 XL-MP60(U).fm TINSEA043SJZZ
XL-MP60
D
is
c
P
lay
b
a
ck
" Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
" After the last track on the fifth disc is played, the CD player stops
automatically.
" When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
" Due to the structure of the disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button
to open the disc compartment.
All trays open in tiers.
4 Place the disc on the disc tray 1, label side up.
Be sure to place 3" (8 cm) discs in the middle of the disc trays.
5 To place discs in the trays 2 - 5
1. Slide in the tray with a disc to-
ward the unit.
2. Place a disc in an empty tray.
5" (12 cm) 3" (8 cm)
6 Press the OPEN/CLOSE button to close the disc compartment.
7 Press the / button to start playback.
CD indicator [CD]
1
1 Total number of tracks on the disc whose number is flashing.
Total playing time of the CD whose number is flashing. 2
2
MP3 track indicator [MP3]
WMA track indicator [WMA]
1
1
Disc play indicator