Using a sony ericsson mobile phone, Using the digital media port adapter, Playing the connected component on the system – Sony DAV-DZ280 User Manual

Page 69: Using a sony ericsson mobile, Phone, Using the digital media port, Adapter

Advertising
background image

Contr

o

l f

o

r HDMI/

Extern

al A

u

dio

D

e

vic
e

69

GB

Using a Sony Ericsson
Mobile Phone

You can connect a Sony Ericsson mobile phone
to the system and enjoy music from it via this
system, or transfer music from this system to the
mobile phone.

1

Connect the mobile phone to the

(USB) port.

2

Set the data transfer mode of your
mobile phone to File Transfer (Mass
Storage).

For details, refer to the operating
instructions supplied with the mobile
phone.

3

Perform playback or transfer via the
system.

• Playback: See “Playing Back Files of a

USB Device” (page 57).

• Transferring: See “Transferring Songs

onto a USB Device” (page 65)

Note

• Connect to this system with the mobile phone turned

on.

• Use the USB cable supplied with the mobile phone

when connecting to the system.

• While the mobile phone is connected to this system,

do not insert or detach the memory card.

• Some files supported by the mobile phone may not be

supported by the system.

• When a song is registered in a music playlist on your

mobile phone and you erase the song via this system,
the playlist entry is not modified.

Using the DIGITAL MEDIA
PORT Adapter

The DIGITAL MEDIA PORT (DMPORT)
adapter is for enjoying sound from a portable
audio source or computer. By connecting a
DIGITAL MEDIA PORT adapter, you can
enjoy sound from the connected component on
the system.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL MEDIA
PORT adapter, see page 17.

Note

• Do not connect an adapter other than the DIGITAL

MEDIA PORT adapter.

• Do not connect or disconnect the DIGITAL MEDIA

PORT adapter to/from the unit while the system is
turned on.

1

Press FUNCTION +/– repeatedly until
“DMPORT” appears in the front panel
display.

2

Start playback of the connected
component.

The sound and images from the connected
component are played on the system or
connected TV.
For operation details, refer to the operating
instructions of the DIGITAL MEDIA
PORT adapter.

Note

• Depending on the type of DIGITAL MEDIA PORT

adapter, images are also output. In this case, the
system outputs the EURO AV T OUTPUT (TO
TV) signal only regardless of the type of video signal

Playing the connected
component on the system

Advertising