Siemens 242 - Manual (Page 10)

Siemens 242 Cordless Phone 10 Owner’s Manual
2. Press the key four times to move to “YOUR AREA CODE”
"
YOUR AREA CODE
CALL WAIT ID
3. Press . to select “YOUR AREA CODE”.
ENTER AREA CODE
4. Enter the local area code.
NOTE: If there is already an area code stored, use to erase it
before entering the new area code.
5. Press to save the local area code.
6. Press to exit.
NOTE: Do not store the local area code in areas
with 10-digit dialing. If an area code changes from 7-digit to 10-
digit dialing, repeat steps 1 through 5 and delete the area code.
n z x Programming Caller ID on Call Waiting (for use with Caller ID services)
The phone comes from the factory with Caller ID on Call Waiting turned on. If you do
not subscribe to Call Waiting or your local telephone company does not provide
Caller ID on Call Waiting, it is recommended to turn this feature off.
1.
Press .
2. Press the key five times to move to “CALL WAIT ID”.
"
CALL WAIT ID
LANGUAGE
3. Press . to select “CALL WAIT ID”.
4. Press the or key to select on or off.
CALL WAIT ID ON CALL WAIT ID OFF
#$
TO CHANGE
#$
TO CHANGE
5. Press to save the setting.
6. Press to exit.