Siemens 242 - Manual (Page 9)

Siemens 242 Cordless Phone 9 Owner’s Manual
n z x Selecting a Ring Tone
1.
Press .
2. Press the key twice to move to “RING TONE”.
"
RING TONE
DIAL MODE
3. Press . to select “RING TONE”(current tone will sound).
RING TONE
2
4. Press the or key to change the ring tone (selected tone will sound).
5. Press to save the ring tone setting.
6. Press to exit.
n z x Selecting Tone or Pulse Dialing
To set the dial mode used by your local phone service (tone or pulse),
1.
Press .
2. Press the key three times to move to “DIAL MODE”
"
DIAL MODE
YOUR AREA CODE
3. Press . to select “DIAL MODE”.
4. Press the or key to change between tone and pulse.
PULSE DIAL TONE DIAL
#$
TO CHANGE
#$
TO CHANGE
5. Press to save a dial mode setting.
6. Press to exit.
n z x Storing Your Local Area Code (for use with Caller ID services)
When you program a local area code, calls from that area code will be stored in the
call log without the area code. This makes a local number readily available for call
back or for moving it to a memory location. To store the local area code,
1.
Press .