SMC Networks SMC7904WBRA - Manual (Page 82)

C
ONFIGURING THE
B
ARRICADE
4-38
To establish a WDS connection between access points, follow the steps
below.
1. Click on the Rescan button to scan and display all wireless devices
within range.
2. Select the wireless devices to which you want to connect by clicking on
an entry, as shown on the AP MAC Address Table (up to 4 APs).
3. Click “SAVE SETTINGS”.
Note: See the STATUS/INFORMATION on
page 74 for the WLAN MAC addresses.
NAT
Network Address Translation allows multiple users to access the Internet
sharing one public IP.