Sanyo VM4500 - Manual (Page 111)

Selecting a Ringer/Image Type for an Entry
You can assign a ringer/image type to a Contacts entry so you can identify
the caller by the ringer or image type. (See “Ringer Types” on page 45.)
To select a ringer type for an entry:
1. Press on the Navigation key.
2. Select the entry for which you want to set the incoming ringer
and press .
3. Highlight a phone number and press Options (right softkey),
highlight Edit, and press .
– or –
Highlight an email address or Web address and press Edit (right
softkey).
4. Select Ringer and press .
5. Select a menu by scrolling up or down and press .
6. Highlight your desired ringer type and press .
ⅷ Ringer & Voice to notify you with Ringer and Voice.
ⅷ Vibrate to notify you by vibrating.
ⅷ Normal to set Ringer to the With Caller ID or Roaming
setting (see page 45).
ⅷ None to turn the ringer type off.
ⅷ Get New to start up the Browser and you can select an item
to download.
7. Press Save (left softkey).
ⅷ To confirm the ringer, highlight Ringer and press Play (right
softkey).
Section 2: Understanding Your PCS Phone
2G: Using the Contacts Directory 99