Sanyo VM4500 - Manual (Page 29)

To answer a call with the Flip Closed:
1. Make sure your phone is on. (If your phone is off, incoming calls
go to voicemail.)
2. When your phone rings or vibrates, press and hold the Side Call
key ( ) on the right side of the phone. (The Call will be
answered in speakerphone mode. )
– or –
Ⅵ Open the phone to use the earpiece.
Note: If the setting for Open Flip is not set to “Answer Call,” opening the phone
will not answer the call. (See “Setting the Open/Close Flip Option” on page 62.)
Your PCS Phone notifies you of incoming calls in the following ways:
ᮣ The phone rings or vibrates.
ᮣ The LED flashes.
ᮣ The backlight illuminates.
ᮣ The screen displays an incoming call message.
ᮣ If available, the phone number of the caller is displayed.
ᮣ If the phone number is in your Contacts list, the Contact entry’s
name is displayed.
The following options are also displayed by pressing .
To select an option, highlight it and press .
ᮣ Call Guard to answer the call when you are roaming mode.
See page 80 for setting Call Guard.
ᮣ Answer to answer the call.
ᮣ Answer:Speaker to answer the call in speakerphone mode.
ᮣ Don’t Answer to hang up the incoming call and return to the Web
while you are in Web operation. (This feature appears only when
PCS Vision access is dormant.)
ᮣ Screen Call to answer the call by using a pre-recorded
announcement. (This feature appears only when you are in a
PCS Service area or digital roaming area. See page 130.)
ᮣ Quiet Ringer to mute the ringer. (This feature appears only when
the ringer is set.)
Tip: Your PCS Phone offers additional ways to answer calls. See page 61 for
Auto Answer, and see page 63 for Any Key Answer.
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 17