Speco Technologies Color Video Monitor - Manual (Page 8)

8
VIDEO
IN
OUT
S-VHS
OUT
Y/C
VIDEO
AUDIO
IN
7
HI
LO 9
8
7
9
OUT
Y/C
VIDEO LO
HI
OUT
S-VHS
AUDIO IN VIDEO IN
9
10
8
7
11
S-VHS
S-VHS
11
11
REAR PANEL CONTROLS
7. VIDEO IN & OUT
These BNC Connectors permits ‘loop-through’ connection of a video signal in installations where it is desirable
to display the video signal on more than one monitor. A standard 1.0 vp-p video signal applied to the video
input will also appear at the video output . Use a coaxial cable with a BNC type plug for these connections.
8. AUDIO IN & OUT
The rear RCA connectors permit audio signal connection.
9. HI / LO
This switch provides convenient selection of a ‘HIGH’ or ‘LOW’ for video input impedance. The switch should
be set to ‘HIGH‘ position when loop-through configuration is used or set to ‘LOW’ when the video signal is to
be terminated at the monitor.
10. Y/C IN & OUT
Permit high resolution VCD,LD,DVD or V-cam signal input connection.
11. Y/C VIDEO
. Control for Y/C & video switch.
Color Monitor Instruction Manual
-7-
14 Inch 10 Inch
OPTION: Y/C FUNCTION
AUDIO FUNCTION