Schumacher Shumacher Power Inverter PI-200 User Manual
Page 9
• 9 •
Do not install a fuse with a higher amp rating than
the original fuse, as this may damage the inverter and any product
you use with the inverter. Make sure to correct the cause of the
blown fuse before using the inverter again.
9. TROUBLESHOOTING
PROBLEM
REASON
SOLUTION
Red LED is on,
audible alarm
is on, and/or
inverter does not
function.
Poor contact at
terminals.
Fuse blown.
Inverter shutdown.
Inverter may not be
working properly.
Unplug and reinsert
the 12V plug or check
connections at power
supply.
See “IF THE INVERTER
FUSE BLOWS” section.
See “LED INDICATOR
AND SHUTDOWN
PROTECTION” section.
See Warranty and call
Customer Service.
The red LED is
lit and the green
LED is not.
12V Accessory
plug or clips are
not making a good
connection to the
battery.
Connections are
reversed.
Inverter may not be
working properly.
Check for poor connection
to battery and frame.
Make sure connection
points are clean. Rock
clips back and forth for a
better connection.
Unplug the charger and
reverse the clips.
See Warranty and call
Customer Service.