SmartBridges airPoint Pro Series User Manual
Page 18
Revision 1.8
Page 18 of 28
The RSSI values are shown in dBm in ClientInfo and Associated AP Info Tab as per the
internal formula. If you want your specific values to be shown in there, please store them
in the table and set the option as "User Defined" from the Advanced TAB.
Configuring the airPoint-PRO in Access Point Mode
In this mode the airPoint-PRO is operating as a normal 802.11b compliant Access Point.
Client Info and Client Auth Tabs of simpleMonitor will be enabled in this Mode. The
important tasks in this mode are
1. Getting associated Client's Information.
2. Authorizing the Clients.
Getting associated Client's Information
Select the
Client Info Tab of simpleMonitor to get the associated Client's Information.
Note: The default setting is internal antenna (shipping condition), whenever an external antenna is
connected change the selection to Antenna B.