SmartBridges airPoint Pro Series - Manual (Page 26)

Revision 1.8 Page 26 of 28
5. Dial a Power
Changing the output Power of airPoint-PRO
Select Dial a Power Tab of simpleMonitor to change the output power of airPoint-PRO.
This feature of airPoint-PRO allows the user to control the radio transmit power of the airPoint-
PRO from the SimpleMonitor software. Make use of the user interface controls in this Tab to
adjust the radio transmit power. Dial a Power facility is available only if you login as
Administrator.
1. Select the antenna connected to airPoint-PRO from Antenna Type drop down list, if you
happen to select the Custom Antenna, please enter the Valid Gain. The limit is 1.0 dBi to
30.0 dBi.
2. Specify Cable Loss value in the Edit box. The limits for this value are min 0.5 dB, max 10.0
dB.