Sony SNC-CS3N - Manual (Page 35)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Page
35
Recording Images in
Memory
— Image memory setting Page
When you click Image memory on the Administrator
menu, the Image memory setting page appears.
Use this page to set up for the image memory function
which captures a still image and records it in the built-in
memory of the camera (about 8 MB). You can capture a
still image at the moment when a trigger occurs by an
external sensor input, the built-in activity detection
function or a manual trigger button. The captured still
image is recorded in the built-in memory. You can also
record a still image periodically.
The recorded image file can be found or downloaded to
the computer using the FTP server function. (See
“Downloading Images from the Camera — FTP server
setting Page” on page 30.)
Activating/Deactivating the Image
Memory Function — Image memory
usage setting Page
Built-in memory
Displays the free space of the built-in memory of the
camera.
Use image memory function/Do not use
image memory function
To activate the Image memory function, select Use
image memory function and click OK. The Image
memory setting page appears.
When you do not use the Image memory function, select
Do not use image memory function and click OK.
Notes
• The image recorded in the built-in memory will be
erased when the power of the camera is turned off.
• The frame rate and operability on the main viewer
page may decrease during image storage.
• The image memory function cannot be activated if the
Backup sending mode menu is set to On. To use the
image memory function, set the Backup sending mode
menu to Off.
Recording an Image in the Memory
— Image memory setting Page
Image file name
Type the basic file name you want to assign to the
images when saving in the memory. You can use up to
6 alphanumeric, - (hyphen) and _ (underscore) for
naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be recorded in memory.
Date/Time: The date/time suffix is added to the file
name.
The date/timer suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits) and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000000 and 4294967295 is added to
the basic file name.
Tip
When the Mode menu is set to Alarm, the type of alarm
and the capture timing to the alarm are added to the
suffix.
Type of alarm: S1 (Sensor), AD (Activity Detection)
Capture timing: PR (Pre-alarm), JT (Just alarm), PT
(Post-alarm)
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Overwrite
Select if you overwrite the file or not when there is
insufficient memory space to record the image.
Select On to allow overwriting. The oldest file or folder
is overwritten first.
Select Off to prohibit overwriting. In this case, a new
file cannot be stored.