Sony BRAVIA 4-418-730-11(1) - Manual (Page 12)

12
• An HDMI or Component video (YP
B
P
R
) connection is required to view 480i, 480p, 720p, 1080i
and 1080p video formats. 1080/24p is available only with HDMI connection.
4 CABLE/
ANTENNA RF input that connects to your Cable or VHF/UHF antenna.
5 VIDEO IN 1/
COMPONENT
IN/R-AUDIO-L
(MONO) This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT). For composite use, connect the
yellow jack to Y for video and use audio L (mono) and R for audio signal.
For component connection, use Y, P
B
, P
R
for video signals and also
connect the audio L (mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and
COMPONENT when VIDEO 1 or COMPONENT is connected.
To set to auto detection, press HOME, select Settings, and then select the
Setup settings. Select the Video1/Component Selection option in AV
Setup then set to Auto.
6 AUDIO OUT Connects to the audio input jack of your analog audio equipment. You can
use this output to listen to your TV’s audio through your stereo system.
7 LAN You can enjoy contents stored in DLNA Certified™ devices via a network
(page 35), and also IPTV, Yahoo! Widgets and Internet Browser are
available.
8 USB Connects to USB equipment to access photo, music, and video files.
The USB Wireless LAN Adapter (UWA-BR100) is available as an optional
accessory.
0 VIDEO IN 2
VIDEO/L
(MONO)-
AUDIO-R Connects to the composite video output jack of video equipment.
If you have mono equipment, connect its audio output port to the TV’s L
(MONO) audio input port.
Item Description