Sony AIRLINK HELIX 2140847 - Manual (Page 12)

AirLink Helix User Guide
6 2140847
Getting Going (the quick version)
The AirLink Helix is designed to be simple to use. No additional software is
required for most users. The remainder of the User Guide provides complete
instructions for using the device.
CDMA
If you have a CDMA device, please follow the instructions as below:
1. Plug the AirLink Helix power adapter into the power connector on the back
panel of the AirLink Helix. Wait approximately two minutes to allow the AirLink
Helix and modem to initialize.
2. Connect your computer to the AirLink Helix with an ethernet cable. Users can
also connect with Wi-Fi using “helix” as the default network name.
3. If the modem is not automatically detected, and if you are a first time user,
you may need to configure your cellular modem through the WAN page in the
ACEmanager with your web browser at 192.168.2.1. The username is
admin
and default password is 12345. For more details on configuring the AirLink
Helix, refer to the chapter titled “Using the ACEmanager.”
GSM
If you have a GSM device, please follow the instructions as below:
1. Insert a SIM card into the SIM slot on the front of the Helix.
2. Plug the AirLink Helix power adapter into the power connector on the back
panel of the AirLink Helix. Wait approximately two minutes to allow the AirLink
Helix and modem to initialize.
3. Connect your computer to the AirLink Helix with an ethernet cable. Users can
also connect with Wi-Fi using “helix” as the default network name.
4. If the modem is not automatically detected, and if you are a first time user,
you may need to configure your cellular modem through the WAN page in the
ACEmanager with your web browser at 192.168.2.1. The username is
admin
and default password is 12345. For more details on configuring the AirLink
Helix, refer to the chapter titled “Using the ACEmanager.”
Have more questions? Look through this manual for more information or contact
Sierra Wireless support at http://www.sierrawireless.com/support.