Sony KP-41PZ1D - Manual (Page 29)

29
S
RM 892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Optional Connections
Selecting the output source for the Euro AV connectors
1
Press the MENU button on the remote control to display the menu
on the screen.
2
Push the joystick to $ to select the symbol, then push to z
button to enter to the VIDEO CONNECTION menu screen.
3
Push the joystick to $ or 4 button to highlight:
TV Screen (input source for the TV screen) or
Output (output source available for :2/q 2 and :3 Euro
AV connectors).
Push the joystick to z to confirm.
4
Push the joystick to Z or z repeteadly to select the desired source:
TV Screen TV, AV1, RGB, AV2, YC2 or AV3
Output TV, AV1, AV2, YC2, AV3 or AUTO
Then press the OK button to confirm.
If you select "AUTO", the output signal will always be the same
one that is displayed on the screen.
If you have connected a decoder, please remember to change
back the Output to "TV" for correct unscrambling.
5
Press the MENU button to exit and return to the normal TV screen.
The selected signal is available for your optional equipment connected to
the appropriate Euro AV connector.
Optional Connections
Using this function you can record on your VCR any signal coming from an external equipment connected to the Euro AV
connectors
:2/q 2 or :3 placed on the rear of the projection TV.
In that case you have to select the output source as described below (if your VCR support Smartlink, this procedure is not
necessary).
PICTURE CONTROL
Personal
Wide
Picture Mode
Contrast
Reset
Format
VIDEO CONNECTION
[TV - - - - - - -]
[AV1 - - - - - - -] TV Screen
Output
TV
AV1