Sony KD-32NX100U - Manual (Page 2)

Control
Integrated Digital TV DRC D BBE V Virtual Surround DOLBY D D
Trinitron
DIGIT AL
MO DE REC
1
4
7
3
6
9
2
5
8
0
DIGIT AL
OK
4
Switching on the TV
5
Automatically tuning the TV
When you first switch on your new TV you need to tune in all the available channels. The ‘Auto Tune’ feature automatically searches and stores all
the available channels for you. The following instructions and illustrations will guide you through this procedure.
6
Finding the video channel
1. First ensure the TV is in analogue mode. If not press the DIGITAL/ button on the remote control.
2. Press the PROG+/- button until the picture from your pre-recorded tape appears on screen.
Notes: If you wish to move the video channel to a different programme number, refer to ‘Rearranging your channels’ section of this manual.
If you have connected your VCR using a scart lead, press the / button repeatedly until the picture from the pre-recorded tape appears on the TV screen.
1. When you switch on this TV for the first time, the Language/Country menu appears on screen
with the word ‘English’ highlighted. Press the V or v buttons on the remote control to choose the
language you require then press the OK button to confirm.
Note: The digital features of this set are designed for use in Great Britain only.
2. The word Country is now highlighted. Press the V or v buttons to choose the country in which
you wish to operate the TV, then press the OK button to confirm.
The autotune prompt screen appears. Press the OK button to select Yes and begin the digital
autotune procedure.
As this may take some time, a menu appears on screen and informs you of the tuning progress.
When all the available digital programmes are found, the analogue tuning display appears and all the
analogue signals are captured and stored.
If no digital and no analogue signals are found, a display appears on screen asking you to confirm
your aerial is connected. Check your aerial is connected then press the OK button to repeat the
tuning procedure.
Once all signals have been captured and stored, the TV returns to normal operation and displays the
digital programme captured on programme number 1.
Note: If no digital signals are captured, then the analogue programme stored on programme number 1 is displayed.
3. To view programmes, press the PROG+/- button or the numbered buttons on the remote control.
Switching between digital and analogue programmes
To check if you are watching a digital or an analogue programme press the button on the remote
control. If you are watching a digital programme an Info display appears on screen providing brief
details for the current and next programme. To switch to analogue programmes press the DIGITAL/
button. When you wish to return to digital programmes press the DIGITAL/ button once more.
1. Connect the TV plug to your mains socket and switch on.
1. Press the on/off switch in a forward direction to switch on the TV.
Note: If the red indicator on the front of the TV is lit the TV is in standby mode. Press the TV
button on the remote control to switch on the TV. Please be patient as the picture may take
a few moments to appear on screen.
/
DIGITAL/
button
Control Pad
(
v,V, OK
buttons)
PROG +/-
buttons