Symbol Technologies VC5090 - Manual (Page 173)

Application Development and Deployment 7 - 29
Misc(1) Tab
This tab is used to configure various miscellaneous features.
Figure 7-26 Misc (1) Tab
Table 7-8 Misc (1) Tab Descriptions
Field Description
Auto-load This drop-down list is used to specify how the AirBEAM Smart Client is to be invoked
automatically when the client device is rebooted. The selections are:
Disable
: the AirBEAM Smart Client is not invoked automatically during the boot
sequence.
Interactive
: the AirBEAM Smart Client is invoked automatically during the boot
sequence. The package synchronization process is started automatically. The
Synchronization Dialog
box appears and the user is required to press the
OK
button
when the process is complete.
Non-interactive
: the AirBEAM Smart Client is invoked automatically during the boot
sequence. The package synchronization process is started automatically. The
Synchronization Dialog
box is displayed, but the user is not required to tap
OK
when the
process is complete. The
Synchronization Dialog
box terminates automatically.
Background
: the AirBEAM Smart Client is invoked automatically during the boot
sequence. The package synchronization process is started automatically. Nothing is
displayed while the synchronization process is occurring.
RAM Management This check box specifies whether the automatic RAM management is enabled during the
package synchronization process.
If enabled, RAM management logic is invoked when there is not enough free disk space
to download a package. The RAM management logic attempts to remove any
discardable AirBEAM packages resident on the client.
Suppress Separator This check box specifies whether the automatic insertion of a file path separator
character should be suppressed when the client generated server package definition file
names.
When enabled, the parameter also disables the appending of .apd to the package. This
feature is useful for AS/400 systems, in which the file path separator character is a
period. When this feature is enabled, the server directory (Directory) and package name
(Package 1, Package 2, Package 3 and Package 4) are appended “as is” when building
the name for the server package definition file.
When this feature is disabled, a standard file path separator is used to separate the
server directory (Directory) and package name (Package 1, Package 2, Package 3 and
Package 4) when building the name for the server package definition file. In addition,
an .apd extension is appended automatically.