Sharp XG-P610X - Manual (Page 56)

-56
Troubleshooting
\ Take the following steps for checking the network settings for the computer.
1. Open a command prompt.
• In the case of Windows ® 2000: click “start”
➔ “Programs” ➔ “Accessories” ➔ “Command
Prompt” in order.
• In the case of Windows ® XP, Windows Vista ® : click “start”
➔ “All Programs” ➔ “Accessories”
➔ “Command Prompt” in order.
2. After launching the command prompt, enter the command “ipconfig”, and press the “Enter”
key.
Note
• Communication may not be established even after carrying out the network settings
for the computer. In such cases, restart your computer.
C:\>ipconfig
Note
• Usage examples of ipconfig
C:\>ipconfig /? displays how to use “ipconfig.exe”.
C:\>ipconfig displays the set IP address, subnet mask and default gateway.
C:\>ipconfig /all displays all the setting information related to TCP/IP.
3. To return to the Windows ® screen, enter “exit” and press the “Enter” key.