Star Micronics FUTUREPRINT TSP100 - Manual (Page 15)

– 12 –
Power switch
3-7. Turning Power On
Make sure that the Power cord has been connected as described in 3-6.
(1) Turn ON the power switch located on the front of the printer.
The POWER lamp on the control panel will light up.
CAUTION
We recommend that you unplug the printer from the power outlet
whenever you do not plan to use it for long periods. Because of this, you
should locate the printer so that the power outlet it is plugged into is
nearby and easy to access.
When an Switch blind is affixed to the printer above the power switch, the
ON/OFF marks of the power switch may be hidden. If this occurs, remove
the power cord from the outlet to turn the printer OFF.
Note: The dialog shown below may appear on your PC screen if your PC is
running Windows 98 or Me, and if you turn ON the power of the printer
for the first time while the PC and the printer are connected with the
USB cable. In this case, refer to the software manual on the CD-ROM,
in the following directory: Documents folder.