Star Micronics FUTUREPRINT TSP100 - Manual (Page 8)

– 5 –
3. Setup
3-1. Connecting the USB Cable to the Printer
Affix the ferrite core onto the USB interface cable and pass the cable through the
cable support as shown. Then, connect the USB interface cable to the printer.
Note: The dialog shown below may appear on your PC screen if your PC is
running Windows 98 or Me, and if you turn ON the power of the printer
for the first time while the PC and the printer are connected with the
USB cable. In this case, refer to the software manual on the CD-ROM,
in the following directory: Documents folder.