SMC Networks SMC7204BRA - Manual (Page 11)

English
19
English
20
7. Finally click [Finish]. The AutoSetup utility will now configure
the ADSL Barricade TM with the settings you have entered. This
may take a few moments. When the setup is complete you will
see the following message:
Your ADSL Barricade TM is now setup. Go to section Troubleshooting
of the User Guide if you cannot make a connection to the
Internet.
Custom
If your Country or ISP is not listed, you will be required to
manually enter your ISP settings. This is done using the option
[Custom]. For custom installation you will also need to know
the following settings supplied by your ISP:
What Protocol? (PPPoA, PPPoE, RFC1483 Bridging
or RFC1483 Routed).
What Encapsulation? (VC-Mux or LLC).
What are the VPI/VCI circuit numbers? E.g. 0/38.