Sony PSP-1006 K - Manual (Page 77)

77
Photo
GB
Photo options menu
You can transfer images with another PSP™ system using ad hoc mode
(
page 104). The steps for the sender and the receiver are different.
1
Set up for ad hoc mode. (both sender and receiver)
1 Turn on the WLAN switch on the left side of the PSP™ system
(
page 21).
2
Prepare to receive the image. (receiver)
1 Under , select the icon for the location where you want to save the
image, and then press the button.
2 Select "Receive", and then press the button.
The system is now ready to receive an image.
3
Send the image. (sender)
1 Select the image you want to send, and then press the button.
2 Select "Send", and then press the button.
The nicknames for PSP™ systems ready to receive an image are displayed.
3 Select the system to send to, and then press the button.
The system starts to send the image.
4
Save the image that you received. (receiver)
When the transfer is completed, the image that was received is displayed
on the screen.
1 With the image displayed, press the button.
A confirmation message is displayed.
2 Select "Yes", and then press the button.
Hints
• The location where an image is saved depends on your selection in step 2-1. Note that you
cannot save images in the Digital Camera Images folder.
• You can also transfer images from the on-screen control panel ( page 71).
Sending and receiving images
Sender Receiver