Case (upper), Mds-nt1 – Sony MDS-NT1 User Manual
Page 14
Advertising
14
MDS-NT1
1
three screws
(BVTP3
×
10)
1
three screws
(BVTP3
×
10)
2
case (upper)
wire (flat type) (7core)
lead wire
OK
NG
lead wire
chassis
lead wire
chassis
wire (flat type) (7 core)
Note 1: Fold down the flat type wire (7 core) in the direction of the
arrow at the first setout, then install the upper case.
Note 2: Check that the lead wire is connected vertically to the chassis
before installing the upper case.
If the lead wire is not connected vertically, it may be caught
between the upper case.
3-2.
CASE (UPPER)
Note:
Follow the disassembly procedure in the numerical order given.
Advertising