Getting ready to start recording – Samsung HMX-T10WN User Manual

Page 40

Advertising
background image

getting ready to start recording

Handling a memory card

We recommend that you power off before

inserting or removing the memory card to

avoid data loss.

We can not guarantee that you can use

memory cards formatted by other devices.

When you format a card, be sure to format

the memory card using this camcorder.

You must format newly-purchased

memory cards, memory cards with data

that your camcorder cannot recognize,

and cards with data saved by other

devices. Note that formatting erases all

data on the memory card.

If you cannot use a memory card that has

been used with another device, format it

with your camcorder. Note that formatting

erases all information on the memory card.

A memory card has a certain life span. If

you cannot record new data, you have to

purchase a new memory card.

Do not bend, drop, or subject the card to

strong impacts.

Do not place foreign substances on the

memory card terminals. Use a soft dry

cloth to clean the terminals if required.

Do not paste anything other than the label

provided with the card on the label pasting

area of the card.

Do not use a damaged memory card.

Be careful to keep the memory card out of

the reach of children, who might swallow it.

The camcorder supports SD and

SDHC memory cards, giving you a

wider choice of cards to choose from!

The data storage speed may differ,

depending on the manufacturer and

production system.

SLC (single level cell) system: faster

write speed enabled.

MLC (multi level cell) system: only

lower write speed is supported.

For best results, we recommend using a

memory card that supports a faster write

speed.

Using a lower write speed memory card

for recording video may cause difficulties

when storing.

You may even lose your video data during

the recording.

In an attempt to preserve every bit of the

recorded video, the camcorder forcibly

stores the video on the memory card and

displays a warning:

“Low speed card. Please record at a

lower resolution.”

If you are unavoidably using a low speed

memory card, the resolution and quality

of the recording may be lower than the

value you set. page 50

The higher the video resolution and

quality, the more memory the camcorder

uses.

Samsung is not responsible for data loss due to misuse, including loss caused by any PC virus.

We recommend using a memory card case to avoid data loss that can be caused by moving the

card or by static electricity.

After a period of use, the memory card may get warm. This is normal and is not a malfunction.

30

Advertising
This manual is related to the following products: