Samsung HMX-T10WN - Manual (Page 49)

Using the optical zoom does not degrade the image quality and clarity.
Use the digital zoom when you want to zoom more than the optical zoom range. page 63
Focusing may become unstable when you record with a fast zoom or zoom into a subject standing
too far away. If this occurs, use the manual focus function. page 57
The minimum distance you can have between the camcorder and subject while maintaining sharp
focus is about 1cm (about 0.4 inches) for wide angle and about 50cm (about 19.7 inches) for
telephoto. If you want to shoot the subject close to the lens at a wide angle, use the Tele Macro
function. page 61
When using the zoom function and holding the camcorder with your hand, use Anti-shake(OIS) for
stable recording. page 58
Frequent use of the zoom function consumes more power.
The camcorder can record the sound of the zoom mechanism.
•
•
•
•
•
•
•
ZOOMING
This camcorder allows you to record using optical 10x
power zoom and digital zoom by sliding the Zoom lever or
pressing the Zoom button on the LCD panel.
When using the zoom function, you can decrease zoom speed by slowly moving the Zoom (W/T) lever. Moving it faster increases
the zoom speed. However, you cannot adjust the zoom speed when using the Zoom (W/T) button on the LCD panel.
Zoom speed
Press the T (zoom) button on the LCD panel or slide
the zoom lever towards T (telephoto).
The distant subject is gradually magnifi ed.
The highest zoom magnifi cation ratio is 10x in the
normal zoom-in.
•
•
Press the W (zoom) button on the LCD panel or
slide the zoom lever towards W (wide angle).
The subject gets smaller and further away.
The smallest optical zoom ratio is the subject’s
original size when zoomed-out.
•
•
To zoom in To zoom out
39
W : Wide angle T : Telephoto