Sony FD Trinitron WEGA KV-28CS70 - Manual (Page 13)

Menu System 13
Introducing and Using the Menu System
GB
Level 1 Level 2 Level 3 / Function
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the “Set
Up” menu allows you to:
a) Preset channels or the VCR channel one by one
to the programme order of your choice.
To do this:
1 After selecting the ”Manual Programme Preset”
option, press the b button then with Programme
option highlighted press the b button.
Press the v or V buttons to select which
programme number you want to preset the
channel to (for VCR, select programme number
“0”). Then press the
B button.
2 After selecting the Channel option, press the OK
button. Next press the numbered buttons to
directly enter the channel number of the TV
Broadcast or the VCR channel. If you do not know
the channel number, press the
v or V buttons to
search for it. When you have tuned to the desired
channel, press the OK button twice to store.
Repeat all the above steps to tune and store more
channels.
b) Label a channel using up to five characters.
To do this:
After highlighting the Programme option, press
the PROG +/- button to select the programme
number of the channel you wish to name. When
the programme you want to name appears on the
screen, select the Label option and press
b
button. Next press the v or V buttons to select a
letter, number or “-“ for a blank. Press the b button
to confirm the character. Select the other four
characters in the same way. After selecting all the
characters, press the OK button twice to store.
c) Manually fine tune the TV to obtain a better
picture reception if the picture is distorted.
Normally the automatic fine tuning (AFT) is in
operation, but you can alter it manually.
To do this:
Whilst watching the channel (TV Broadcast) you
wish to fine tune, select the AFT option and press
b button. Next press the v or
V buttons to adjust
the fine tuning between -15 and +15. Finally
press the OK button twice to store.
d) Skip any unwanted programme numbers when
they are selected with the PROG +/- buttons.
To do this:
After highlighting the Programme option, press
the PROG +/- button to select the programme
number you want to skip. When the programme
you want to skip appears on the screen, select
the Skip option and press the
b button. Next
press the v or V buttons to select Yes. Finally
press the OK button twice to confirm and store.
To cancel this function later on, select “No”
instead of “Yes” in the step above.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
continued...
GB text.fm Page 13 Tuesday, March 30, 2004 3:47 PM