Sunwave Tech. SRC-3000b - Manual (Page 17)

3.3 Using Pre-programmed Code to Program Devices
13
5. Locate your target device’s
four-digit code in
Preprogrammed Code List and
enter it.
NOTES:
a. Some codes are designed to operate more than one
model. It may take several trials to find the code that fits
your device.
b. When you enter the four-digit code number and the icon
is displayed, it could be that the code number
doesn’t exist in the Pre-programmed Code List
c. Each device classification can be used to control anther
type of device. You just need to enter the four-digit code
number.
Example:
You have two different TVs, TV1 and TV2. And you want to
integrate the two TVs in SRC-3000b.
1. Please load the codes for TV1 by entering the four-digit
code number for the TV deice.
2. You can select another device (for example, DVD) and
load the codes for TV2 by entering the four–digit code
number.
3. In this way, you can control TV1 in TV device and control
TV2 in DVD device.