Sunwave Tech. SRC-3000b - Manual (Page 24)

SRC-3000B User’s Manual
20
3.5 Resetting the SRC-3000b to Factory Defaults
This function enables you to reset the SRC-3000b to the
factory default configuration.
NOTE:
All Macros and programmed keys will be deleted when
you reset the SRC-3000b to factory defaults.
1. Press and hold the key
for 3 seconds to enter the
confirmation screen.
2. Press each number button
(2, 4, 6, 8) in any order until
they disappear and start to
use the function.
3. Press and to select
mode.
4. And then press key to
confirm your selection.
5. To avoid resetting the remote
accidentally, the
confirmation screen will
appear again.
6. If you really intend to reset
the SRC-3000b, please press
the four numbers(2,4,6,8)
again.