Sony Bluetooth BT3700U - Manual (Page 9)

9
E:\#Data Disc\1006_Saishin\4125655411\412565541MEXBT3700U\01GB02CD-
EUR.fm masterpage:Right
MEX-BT3700U
4-125-655-41 (1)
I USB terminal page 15
To connect to the USB device.
J SEEK +/– buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
2 :
To skip tracks (press).
K (front panel release) button page 7
L BT (BLUETOOTH) button page 18
For Bluetooth signal on/off, pairing.
M Receptor for the card remote
commander
N ZAP button page 12
To enter ZAPPIN™ mode.
O AF (Alternative Frequencies)/TA
(Traffic Announcement)/PTY
(Program Type) button page 13, 14
To set AF and TA (press); select PTY (press
and hold) in RDS.
P Number buttons
CD/USB:
(1)/(2): ALBM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
(3): REP page 14, 15, 17
(4): SHUF page 14, 15, 17
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
2 :
(6): PAUSE
To pause playback. To cancel, press
again.
Bluetooth phone:
(5): MIC page 19
Q DSPL (display)/SCRL (scroll) button
page 13, 14, 15, 16, 17
To change display items (press); scroll the
display item (press and hold).
R AUX input jack page 23
To connect a portable audio device.
S RESET button page 6
T Microphone page 19
Note
Do not cover the microphone, the handsfree
function may not work properly.
*1 In the case of a CD changer being connected;
when (SOURCE) is pressed, “CD” and the unit
number will appear in the display. Furthermore, if
(MODE) is pressed, you can switch the changer.
*2 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.