Sony PX312F - Manual (Page 44)

44 GB
4
Press z REC/PAUSE to start recording.
The built-in microphone is automatically
cut off, and the IC recorder starts
recording sounds from the external
microphone.
If the input level is not strong enough,
adjust the “Mic Sensitivity” setting on
the IC recorder (page 91).
When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the IC
recorder.
5
Press x (stop) to stop recording.
z Recommended microphones
You can use the Sony ECM-CS10,
ECM-CZ10, ECM-DS70P, ECM-DS30P
electret condenser microphone (not supplied).
To record sound from a
telephone or a cell phone
You can use the ECM-TL1 headphone-type
electret condenser microphone (not
supplied) to record sound from a telephone
or a cell phone.
For details on how to make the connection,
refer to the operating instructions supplied
with the ECM-TL1 microphone.
P Notes
• After you have made the connection, check
the sound quality of the conversation and the
recording level before you start recording.
• If the beep of the telephone or a dial tone is
recorded, the conversation may be recorded
with lower level of sound. In this case, start
recording after the conversation has started.
• The VOR function (page 37) may not work,
depending on the kind of telephone or the
line condition.
• We assume no responsibility whatsoever for
any inconvenience, even if you cannot
record a conversation using the IC recorder.