Speco Technologies KBD-927 - Manual (Page 20)

20
D. Set as below in Network menu.
Set Baud Rate
Dome : 9600
Mux : 9600
DVR485 : 9600
DVR232 : 9600
Com Ports
Dome : Dome
Mux : None
DVR485 : AUX IN
DVR232 : SDR
4) How to setup SDR
- Switch the SDR on.
- Press the Menu button. Input password according to the instruction. (Factory setting is 4321)
- If the below screen is appeared, set “Quick Setup” to “Off”.
If press OK after putting Quick Setup to off status, the below screen will be appeared.
Besides, the below screen will be appeared according to installation status.