Speco Technologies KBD-927 - Manual (Page 24)

24
If PTZ is not necessary for IDR, cable and installation here is not needed. (IDR is able to be controlled
remotely and there’s no PTZ function)
8) How to IDR Remote setup
- If selects Setup on main menu, the below screen will be appeared.
After selecting System and checking Remote control box, please install as below to select Setup remote
control. Device ID is not allowed number “0”.
Port : COM1
Baud Rate : 9600
Date : 8
Parity : None
Stop Bit : 1
Device ID : XX
3) Make sure if any change is appeared on screen to press Ctrl + 9 (Next Screen) button of a
controller for basic testing. If there’s no change appeared, check cable connection and installation
again.