Sony HT-DDWG800 - Manual (Page 7)

7 GB
Getting Star
ted
About the indicators on the display
SW LFE
L C
SL S
; D ; PLII ; PL OPT DTS MEMORY RDS ST
MONO D.RANGE COAX HDMI
R
SR
1 2 3 4 6 9 8 5 7
q; qa qf qs qd
Name Function
A SW Lights up when the audio signal
is output from the SUB
WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C ; D
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO” (page 63).
D ; PLII
Lights up when the Pro Logic II
Movie/Music decoder is
activated.
E ; PL
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
F OPT Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack (page 63).
Name Function
G DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO” (page 63).
H MEMORY Lights up when a memory
function, such as Preset
Memory (page 53), etc., is
activated.
I Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 51), etc.
Note
“RDS” appears for models of
area code CEL, CEK only.
J Preset
station
indicators
Lights up when using the
receiver to tune in preset radio
stations. For details on
presetting radio stations, see
page 53.
K D.RANGE
Lights up when dynamic range
compression is activated (page
38).
L COAX
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack (page 63).
M HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN jack
(page 21).
continued